Panasonic TC-P58S2

22
8 Disassembly and Assembly Instructions
8.1. Remove the Rear cover
1. See PCB Layout (Section 3)
8.2. Remove the AC inlet
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable.
2. Disconnect the connector (P9).
3. Remove the screw (×1 ) and remove the AC inlet.
8.3. Remove the P-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for dis-
charge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (P51-P52, P53-P54 and P55-
P56).
3. Disconnect the connectors (P2, P6, P7, P9, P11 and
P35).
4. Remove the screws (×9 ) and remove the P(MAIN)-
Board.
5. Remove the screws (×6 ) and remove the P(SUB)-
Board.
8.4. Remove the Side terminal
cover and the Rear AV panel
1. Remove the claws (×2 ).
2. Remove the Side terminal cover.
3. Remove the screws (×2 , ×3 ).
4. Remove the Rear AV panel.