Panasonic TC-P58S2

24
8.9. Remove the SD-Board
1. Remove the flexible cables (SD1, SD2, SD3, SD4 and
SD5) connected to the SD-Board.
2. Remove the flexible cable (SU11-SD11) and the bridge
connectors (SC42-SD42 and SC46-SD46).
3. Remove the molding props (×2 ).
4. Remove the screws (×3 , ×2 ) and remove the SD-
Board.
8.10. Remove the SC-Board
1. Remove the SU-Board and SD-Board. (See section 8.8.
and 8.9.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connector (SC2).
4. Disconnect the flexible cable (SC20).
5. Remove the screws (×10 ) and remove the SC-Board.
8.11. Remove the SS2-Board
1. Remove the Tuner unit. (See section 8.5.)
2. Disconnect the bridge connector (SS03-SS22) and dis-
connect the flexible cable (SS57).
3. Remove the screws (×3 ) and remove the SS2-Board.
8.12. Remove the SS-Board
1. Remove the Tuner unit. (See section 8.5.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connector (SS11).
4. Disconnect the flexible cables (SS33, SS53 and SS56).
5. Disconnect the bridge connector (SS03-SS22).
6. Remove the screws (×7 ) and remove the SS-Board.