Panasonic TC-P65V10 - Remove the Speakers; Remove the Control Button Unit; Remove the GK-Board; Remove the SU-Board

21
8.7. Remove the Speakers
1. Unlock the cable clampers to free the cable.
2. Disconnect the Speaker terminal.
3. Remove the screws (×2 ) and remove the Speakers
(L, R).
8.8. Remove the Control button unit
1. Disconnect the connector (C14).
2. Remove the screws (×2 ).
3. Remove the Control button unit.
8.9. Remove the GK-Board
1. Remove the Control button unit. (See section 8.8.)
2. Remove the screws (×2 ).
3. Remove the GK-Board MTG. metal.
4. Remove the claw (×3 ).
5. Disconnect the connector (GK1).
6. Remove the GK-Board from Control button.
8.10. Remove the SU-Board
1. Remove the flexible cables (SU1, SU2, SU3, SU4 and
SU5) connected to the SU-Board.
2. Remove the flexible cable (SU11-SD11) and the bridge
connector (SC41-SU41).
3. Remove the molding props (×3 ).
4. Remove the screws (×3 , ×3 ) and remove the SU-
Board.