Panasonic TC-P65V10 - Remove the SS3-Board; Remove the SS-Board; Remove the Support Metal (C); Remove the Support Metals (L, R)

23
8.14. Remove the SS3-Board
1. Remove the Tuner unit. (See section 8.5.)
2. Disconnect the bridge connector (SS03-SS22) and dis-
connect the flexible cables (SS57 and SS59).
3. Remove the screws (×4 ) and remove the SS3-Board.
8.15. Remove the SS-Board
1. Remove the Tuner unit. (See section 8.5.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (SS11 and SS33).
4. Disconnect the flexible cables (SS53, SS55 and SS56).
5. Disconnect the bridge connectors (SS02-SS24A and
SS03-SS22).
6. Remove the screws (×6 ) and remove the SS-Board.
8.16. Remove the Support metal (C)
1. Remove the screws (×4 , ×2 ).
2. Remove the Support metal (C).
3. Remove the screws (×2 ).
4. Remove the Shield metals (L, R).
8.17. Remove the Support metals (L,
R)
1. Remove the Tuner unit. (See section 8.5.)
2. Remove the screws (×2 , ×1 each).
3. Remove the Support metals (L, R).