Panasonic TGP600

15
4.2. Common Configuration and Operation
It is necessary to set this configuration parameter for activating XML application feature.
4.2.1. Configuration Parameter
Configuration parameters are as follows.
Configuration Parameter
Description
Format
Value
Range
Default
Value
XMLAPP_ENABLE
Set “Y” for activating XML application
feature.
Boolean
Y/N
N
XMLAPP_USERID
Specify user ID for XML server
authentication
String
Max. 128
characters
Empty
String
XMLAPP_USERPASS
Specify the Password for XML server
authentication
String
Max. 128
characters
Empty
String
XML_HTTPD_PORT
Specify listen port number for receiving
XML push event from XML server.
Integer
1 to 65535
6666
XML_ERROR_INFORMATION
Set “N” in order to inhibit displaying error
information on the phone’s LCD.
Boolean
Y/N
Y
If it is necessary to access secure to the network phonebook server, it is able to use HTTPS protocol instead
of HTTP.
For that, it is necessary to compose the following parameters in the addition. (C.f. Admin Guide)
Configuration Parameter
Description
Format
Value
Range
Default
Value
HTTP_SSL_VERIFY
Specifies whether to enable the
verification of the root certificate.
- 0 (No verification)
- 1 (Simple verification)
- 2 (Precise verification
Integer
0~2
0
CFG_ROOT_CERTIFICATE_PATH
Specifies the URI of the root certificate.
String
Max.384
characters
Empty
String
4.2.2. Remarks of Softkey and FFkey Operation (*1)
When XML contents are displayed, Softkeys and FFkeys are controlled according to its XML definition.
It means default Softkey and FFkey for phone use cannot be used in the XML contents.
It is able to exit from XML contents by using following methods.
- Press [Cancel] button.
- Off hook the handset
- [SP-PHONE] On.
Note. (*1) HDV330/430 are supported only FFKey Operation.TGP600 and HDV100 are not supported.
Configuration Parameter
Description
Format
Value
Range
Default
Value
XML_SOFT_KEY_NAMEx
x=1-3
Specifies the name of Soft Key A/B/C
assigned XML application.
String
Max.16
characters
Empty
String