4.3. Initiation methods of XML application (*1)
The phone has six types of methods to access XML contents as follows.
- Phone Status (4.3.1)
- Phonebook menu (4.3.2)
- Application menu (4.3.3)
- Call log key (4.3.4)
- Initiation key (4.3.5)
- Redial key(4.3.6)
Please refer to each section for more detail.
Note. (*1) Supported only HDV130/230/330/430.
4.3.1. Acquiring XML data corresponding to the Phone Status - Configuration
It is able to acquire specified XML data linked to the status of the phone.
For example, company logo bitmap is display when the phone goes idle status.
Operations depend on the each XML data.
4.3.1.1. Configuration Parameter
Configuration parameters are as follows.
Specify the XML URL to acquire when the
phone starts up.
It is useful for displaying startup logo.
This is only once when the phone starts.
Specifies the URL that is accessed when
the application is started from the unit's
menu, to check for XML data.
Specify the XML URL to acquire when the
phone receives a call.
Specify the XML URL to acquire when the
phone goes talking.
Specify the XML URL to acquire when the
phone goes off-hook.
Specifies the URL that is accessed when
the call log is accessed, to check for XML
data.
Specify the XML URL to acquire when the
phone is idle state.
It is useful for displaying company logo in
the idle state.
Specifies whether to use the XML
application or operate normal telephone
when the corresponding button is
pressed. (FF Key and Page Key)
Y: XML Mode
N: Normal Telephone Mode
XMLAPP_STATUSBAR_ENABLE
(*1)
Selects whether to enable or disable
“Icon, Text, Clock on the Status Bar XML
application feature.
Y: Enable Display “Icon, Text, Clock”
on Status Bar
N: Disable
(*)It is not possible to notify internal variables, such as originating call number, to XML server dynamically.
Note. (*1) Only HDV330/430 supports the “XMLAPP_STATUSBAR_ENABLE”
To Next Page
Loading...
