How to fix no sound on Panasonic Monitor?
If there is no sound on your Panasonic Monitor, first verify that the mute function is not activated on the remote control. Also, ensure the unit is properly plugged into the AC outlet and switched on by pressing the power switch or stand-by button on the remote. Finally, check the Picture and Brightness/Volume settings.
What to do if Panasonic TH-103PF10EK Monitor remote control not working?
If the remote control isn't working with your Panasonic Monitor, check if the batteries have discharged completely or were not inserted properly. Also, make sure the remote control sensor isn't exposed to strong light. Finally, ensure you are using the remote control specifically designed for your unit.
How to prevent image retention on Panasonic TH-103PF10EK?
To prevent image retention on your Panasonic Monitor, avoid displaying a still picture for extended periods.
How to restore color on Panasonic Monitor?
If there is no color on your Panasonic Monitor, adjust the Color controls. You may also need to refer to the color system settings.
Why does my Panasonic TH-103PF10EK make cracking sounds?
The occasional cracking sound from your Panasonic Monitor is normal. It's caused by the cabinet undergoing slight contractions due to changes in room temperature.
Why are parts of the image missing when I zoom on my Panasonic TH-103PF10EK?
If areas at the top and bottom of the screen where the image is missing appear when you use the zoom function on your Panasonic Monitor, it is a common occurrence with certain video software programs when using a video software program with a screen wider than 16:9 mode.
Why does the screen darken on my Panasonic Monitor sometimes?
The screen of your Panasonic Monitor darkens slightly when bright pictures with minimal movements are shown to reduce image retention.
Why does it take so long for the picture to appear on my Panasonic TH-103PF10EK?
The delay for the picture to appear on your Panasonic Monitor is because the unit digitally processes the various signals.
Why can I hear sounds from inside my Panasonic Monitor?
Hearing sounds from inside your Panasonic Monitor is normal and not indicative of malfunctioning.
Why do the edges of images flicker on my Panasonic Monitor?
The flickering edges on images displayed on your Panasonic Monitor are due to the characteristics of the system used to drive the panel and are normal.
General| Screen Size | 103 inches |
|---|---|
| Display Type | Plasma |
| Aspect Ratio | 16:9 |
| Viewing Angle | 160 degrees |
| Resolution | 1920 x 1080 |
| Input Terminals | HDMI, Component, Composite |
To Next Page