Panasonic TH-42LF20E - Signal Menu; 3 D Y;C Filter

3D Y/C Filter
On
1/2
Signal
Input label
Wobbling
Setup
Off
Power management
Off
Auto power off
Off
Standby save
Off
(
SERIAL
)
ECO
Off
OSD Language English
(
UK
)
Component/RGB-in select
RGB
Screensaver
3D Y/C Filter
Colour system
Signal
On
Auto
Cinema reality
Off
[
AV
]
Noise reduction
Off
Cinema reality
Signal
Off
H-Freq.
Dot Clock Freq.
kHz
MHz
63.98
108.0
V-Freq. Hz
60.02
Noise reduction
Off
[
Digital
]
Signal Format 1280×1024/60
Signal
[
Component
]
H-Freq.
V-Freq.
kHz
Hz
63.98
60.02
Signal Format
1280×1024/60
Noise reduction
Off
XGA Mode
1024
× 768
Cinema reality
Off
Sync
Signal
H-Freq.
V-Freq.
kHz
Hz
63.98
60.02
Signal Format
1280×1024/60
[
RGB
]
Cinema reality
Noise reduction
XGA Mode
Auto
Off
Off
1024
× 768
37
3D Y/C Filter
Select “Signal” from the “Setup” menu during Video (S Video) input signal. (“Signal [AV]” menu is displayed.)
Press to select the “3D Y/C Filter”
Press to set On / Off.
Setup for Input Signals
Signal menu
Press ACTION ( ) button
For Video (S VIDEO) For RGB
For Component For Digital
Press to select the menu to adjust.
Press to adjust the menu.
Press to exit from adjust mode.
3
4
Press to display the Setup menu.
Press to select the “Signal”.
Press to display the Signal menu.
2
1
Note:
“Signal” setup menu displays a different setting condition for each input signal.