MS Mode
Select the MS mode by Up/Down button on the remote control at the front page of CAT mode and the press
the Mute button on the remote control more than 3 seconds.
To exit the MS mode, press the R button on the remote control.
Caution:
Market Select should be set after exchange of A-Board.
Destination number:
ID Mode
Select the ID mode by Up/Down button on the remote control at the front page of CAT mode and the press
the Mute button on the remote control more than 3 seconds.
To exit the ID mode, press the R button on the remote control.
Number Destination
0 Japan
1 US
2 EU
3 Asia, Oceania
12 China
Market select 01.01 1 20
MS
Change by Left/Right buttons on the
remote control and press the action button
to confirm.
Present number
EEPROM data version
IIC1 IIC2
A IC4504 OK HA2 DS IC3120 OK H64
IC4701 OK HB0
IC4201 OK H8C
IC1506 OK H92
ADC Adjust OK
EDID VERIFY OK
ID
To Next Page
Loading...
