1/2
Signal
Input label
ECO Mode settings
Setup
Screensaver
Wobbling
Off
OSD Language English
(
UK
)
Component/RGB-in select
RGB
No activity power off
Disable
Press to display the Setup menu.
Press to select Input label.
Press to display the Input label menu.
Press to select image input.
Press to change input label.
1
2
3
Input label
PC
DVI
HDMI
PC
DVI
HDMI
30
Customizing the Input labels
This function can change the label of the Input signal to be displayed. (see page 15)
Image input Input label
[PC] PC* / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip)
[DVI] DVI / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip)
[HDMI] HDMI / DVD1 / DVD2 / DVD3 / Blu-ray1 / Blu-ray2 / Blu-ray3 / CATV / VCR / STB / (Skip)
(Skip): The INPUT button press will skip its input.
* “PC” may be displayed as “PC [YP
BPR]” depending on the setting of “Component/RGB-in select”. (see page 34)
To Next Page
Loading...
