Panasonic TH-42PH11UK - 8 Disassembly and Assembly Instructions; Removal of Rear Cover; Removal of HDMI-Board; Removal of HA-Board

19
TH-42PH11UK
8 Disassembly and Assem-
bly Instructions
• To disassemble P.C.B., wait for 1 minute after power was off
for discharge from electrolysis capacitors.
• , , , and marks indicate screw positions.
8.1. Removal of Rear Cover
1. Remove screws (×13 , ×23 , ×4 ) and then remove
the Rear Cover.
8.2. Removal of HDMI-Board
1. Remove 4 screws (A) and then remove the HDMI Termi-
nal Block.
2. Remove 4 screws (B).
3. Remove 2 screws (C) and then remove HDMI-Board.
8.3. Removal of HA-Board
1. Remove 4 screws (D) and then remove the HA Terminal
Block.
2. Remove 4 screws (E).
3. Remove 3 screws (F) and then remove HA-Board.
8.4. Removal of Slot Block
1. Remove the flexible cables from the connectors (DS1,
DS3).
2. Disconnect the connectors (DS2, DS4, DS6, DS7, DS8,
DS15).
3. Remove 5 screws and then remove the Slot Block.