Panasonic TH-42PH11UK - Removal of HX-Board; Removal of DS-Board; Removal of DN-Board

20
TH-42PH11UK
8.5. Removal of HX-Board
1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Remove 6 screws and then remove the Slot Case.
3. Disconnect the connector (HX1).
4. Remove 4 Hexagonal-Head screws and 2 screws of HX-
Board and then remove HX-Board.
8.6. Removal of DS-Board
1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Remove 6 screws and then remove the Slot Case.
3. Disconnect the connector (DS14).
4. Remove 10 screws and then remove the Fixed Plate.
5. Remove 3 screws and then remove DS-Board.
8.7. Removal of DN-Board
1. Remove the flexible cables from the connectors (DN1,
DN2).
2. Disconnect the connectors (DN5, DN31, DN32).
3. Remove 4 screws and then remove DN-Board and Fixed
Plate.
Note:
A re-setup of the destination is performed by MS
mode after DN-Board exchange.