30
Screensaver (For preventing after-images)
Side Panel Adjustment
1
Press to select Side panel.
Press to select Off, Low, Mid, High.
Press to exit from Screensaver.
2
Do not display a picture in 4:3 mode for an extended period,
as this can cause an after-image to remain on the side panels
either side of the display fi eld.
To reduce the risk of such an after-image, illuminate the side
panels.
Display the Screensaver screen.
(Refer to the previous page, operation guide steps 1 and 2)
Notes:
• To reduce the occurrence of after-images, set the Side panel to High.
• The side panels may fl ash (alternate black / white) depending on the picture being shown on the screen. Using
Cinema mode will reduce such fl ashing.
side panel
4:3
Screen Display
after-images
AB
Picture out Picture Picture and Picture
Non picture area
This function may be applicable to the non-picture area.
Screensaver
Start
Function
Mode
Side panel
Wobbling
Peak limit
Finish Time
Start Time
White bar scroll
Off
6:15
12:30
High
Off
Off
PRESENT TIME 99:99
Off Mid HighLow
To Next Page
Loading...
