EasyManua.ls Logo

Panasonic TH-42PS9EK - Specifications

Panasonic TH-42PS9EK
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46
Speci cations
TH-42PS9EK/S
Power Source 220 - 240 V AC, 50/60 Hz
Power Consumption
Power on 280 W
Stand-by condition Save off 0.8 W, Save on 0.6 W
Power off condition 0.2 W
Plasma Display panel Drive method : AC type
42-inch, 16:9 aspect ratio
Contrast Ratio Max 10000:1
Screen size 920 mm (W) × 518 mm (H)
× 1,056 mm (diagonal)
(No.of pixels) 408,960 (852 (W) × 480 (H))
[2,556 × 480 dots]
Operating condition
Temperature 0 °C - 40 °C
Humidity 20 % - 80 %
Applicable signals
Colour System NTSC, PAL, PAL60, SECAM, Modi ed NTSC
Scanning format 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 750 (720) / 60p · 50p, 1125 (1080) / 60i · 50i · 24p ·
25p · 30p · 24sF ···· SMPTE274M, 1250 (1080) / 50i
PC signals VGA
SVGA, XGA, SXGA, UXGA ···· (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
Connection terminals
AV VIDEO IN (BNC)
S VIDEO IN (MINI DIN 4PIN)
AUDIO IN (RCA PIN JACK × 4)
1.0 Vp-p (75 Ω or high impedance)
Y: 1 Vp-p (75 Ω), C: 0.286 Vp-p (75 Ω)
0.5 Vrms
PC (HIGH-DENSITY MINI D-SUB 15PIN)
B/P
B/CB:
R/P
R/CR:
HD/VD:
VBS (use HD port)
AUDIO IN (M3 JACK)
Y or G with/sync 1.0 Vp-p (75 Ω)
Y or G without/sync 0.7 Vp-p (75 Ω)
0.7 Vp-p (75 Ω)
0.7 Vp-p (75 Ω)
1.0 - 5.0 Vp-p (high impedance)
with/picture 1.0 Vp-p (high impedance)
without/picture 0.3 Vp-p (high impedance)
0.5 Vrms
SERIAL EXTERNAL CONTROL TERMINAL (D-SUB 9PIN) RS-232C COMPATIBLE
SPEAKERS (6 Ω) 16W [8 W + 8 W] (10 % THD)
Accessories Supplied
Remote Control Transmitter
EUR7636090R
Batteries 2 × R6 Size
Fixing bands (TMME203 or TMME187) × 2
Dimensions (W × H × D) 1,020 mm × 610 mm × 89 mm
Mass (weight)
main unit only approx. 26.0 kg net
with speakers approx. 30.0kg
Notes:
Design and speci cations are subject to change without notice. Mass and dimensions shown are approximate.
This equipment complies with the EMC standards listed below.
EN55022, EN55024, EN61000-3-2, EN61000-3-3.

Related product manuals