21
7.14. Remove the G-Board, GH-
Board and GS-Board
1. Remove the front shield unit assy. (See section 7.13.)
2. Remove the screws (×3 ) and remove the front shield
front.
3. Remove the screws (×7 ) and disconnect the connec-
tor (G51, GH11 and GS52).
4. Remove the G-Board, GH-Board and GS-Board.
7.15. Remove the speaker L, R
1. Disconnect the connector (A12). (See section 7.4.)
2. Remove the screws (×4 each) and remove the
speaker L, R.
7.16. Remove the S-Board
1. Remove the stand brackets. (See section 7.10.)
2. Remove the screws (×2 ).
3. Disconnect the connector (S1).
4. Remove the screws (×2 ) and remove the S-Board.
7.17. Remove the K-Board
1. Remove the S-Board. (See section 7.16.)
2. Unlock the cable clampers to free the cable.
3. Remove the screws (×2 ).
4. Disconnect the connectors (K1) and remove the K-Board.
7.18. Remove the Plasma panel sec-
tion from the Cabinet assy
(glass)
1. Remove the stand brackets (left, right) fastening screw
(×1 each).
2. Remove the cabinet assy and the plasma panel fastening
To Next Page
Loading...
