15
English
Video equipment connection
1 AV IN (VIDEO): Composite Video Input Terminal
Connect to video equipment such as
VCR or DVD player, etc.
(see page 19)
2 PC IN: PC Input Terminal
Connect to video terminal of PC,
video equipment with “Y, P
B(CB),
PR(CR)” or “R, G, B” output.
(see page 18)
3AV IN
(HDMI 1,
HDMI 2):
HDMI Input Terminal
Connect to video equipment such as
VCR or DVD player, etc.
(see page 16)
4 DVI-D IN: DVI-D Input Terminal
Connect to video equipment with
DVI-D output.
(see page 17)
5 SERIAL IN: Serial Control Terminal
Control the Display by connecting
to PC.
(see page 19)
6 LAN: LAN Terminal
Control the Display by connecting to
Network.
(see page 64)
7 USB: USB Memory Terminal
Connect the USB memory to use
the USB media player function. Also,
this can be used to supply power of
up to 5V/1A to an external device
when receiving images.
(see page 22,31)
8 IR IN, IR OUT: Infrared Signal Input/output
Terminal
Use this when operating more than
one display with one remote control.
(see page 21)
9 AUDIO IN: Audio input terminal shared with
DVI-D IN and PC IN
(see page 17,18)
10 AUDIO OUT: Analogue Audio Output Terminal
Connect to audio equipment with
analogue audio input terminal.
(see page 21)
Note
Ɣ
If the outer shape of the plug of a connection cable
is large, it may come in contact with the plug of an
adjacent connection cable. Use a connection cable
with the suitable plug size for the terminal alignment.
To Next Page
Loading...
