English
24
Remote Control Transmitter
1 Standby (ON/OFF) button ( )
Ɣ
Turns the power on or off when the Display is
turned on at the power switch.(see page 25)
2 POSITION
(see page 38)
3 SETUP
(see page 47)
4 ENTER / Cursor buttons (
)
Ɣ
Used to operate the menu screens. (see page 36)
5 ZOOM
Ɣ
Enters the digital zoom mode. (see page 30)
6 DEFAULT
Ɣ
Resets the settings of picture, sound, etc., to
defaults. (see page 38, 40, 41)
7 MUTE
Ɣ
Sound mute on / off. (see page 28)
8 ASPECT
Ɣ
Adjusts the aspect. (see page 29)
9 VOL + / VOL -
Ɣ
Adjusts sound volume level. (see page 28)
10 AUTO SETUP
Ɣ
Automatically adjusts the position/size of the
screen. (see page 38)
11 INPUT
Ɣ
Switches input to display on the screen. (see
page 27)
12 PICTURE
(see page 41)
13 SOUND
(see page 40)
14 RECALL
Ɣ
Displays the current setting status of Input mode,
Aspect mode, etc. (see page 27)
15 RETURN
Ɣ
Used to return to the previous menu. (see page 36)
16 FUNCTION
(see page 57)
17 OFF TIMER
Ɣ
Switches to stand-by after a fixed period. (see
page 28)
18 Numeric buttons (1 - 6)
Ɣ
Used as shortcut buttons by assigning frequently
used operations. (see page 57)
19 Signal emission
Note
Ɣ
In this manual, buttons of the remote control and
the unit are indicated as < >.
(Example: <INPUT>.)
The operation is mainly explained indicating the
remote control buttons but you can also operate
with the buttons on the unit when there are the
same buttons.
To Next Page
Loading...
