Panasonic TH-43LFE8W - Page 52

English
52
[DVI-D power management]
When this function is set to [On], it operates under
the following conditions to turn the power on or off
automatically.
When no pictures (sync signal) are detected for
60 or so seconds at DVI-D input:
Power is turned off (standby); the power indicator
lights up orange.
When pictures (sync signal) are subsequently
detected:
Power is turned on; the power indicator lights up
green.
[PC power management] (DPMS function)
When this function is set to [On], it operates under
the following conditions to turn the power on or off
automatically.
When no pictures (HD/VD sync signals) are
detected for 60 or so seconds at PC input:
Power is turned off (standby); the power indicator
lights up orange.
When pictures (HD/VD sync signals) are
subsequently detected:
Power is turned on; the power indicator lights up
green.
Note
Ɣ
This function is effective when [Sync] in [Signal] is
set to [Auto] or [HV sync] and during normal viewing
and [Component/RGB-in select] is set to [RGB].
(see page 48)
[Power save]
This function adjusts the brightness of the backlight
to reduce power consumption.
[Off]:
This function does not operate.
[On]:
Backlight brightness is reduced.
Note
Ɣ
If [Input search] is set to items other than [Off], the
[Input search] function is prioritised. (The power
management function does not operate for each
terminal.) (For details of [Input search] function, see
page 59.)
Wobbling
Automatically shifts the display image (therefore
unnoticeable to the eye) to prevent image retention of
sharper contour of image.
Setting this to [On] moves the screen position at certain
intervals and displays the images.
Note
Ɣ
If [Multi display setting] is set to [On], this function
does not operate. (see page 53)
Ɣ
When this function is operating, part of the screen
may appear to be missing
No activity power off
When this function is set to [Enable], the power is turned
off (standby) automatically when there is no operation of
the Display for 4 hours.
Starting from 3 minutes before the turn off, the
remaining time will be displayed.
No activity power off
Press any key to abort.
3 min
When the power is turned off due to this function, a
message [Last turn off due to ‘No activity power off’.] is
displayed next time the power is turned on.
Note
Ɣ
During the screensaver is running, this function is
disabled.
OSD language
Select your preferred language.
Selectable languages
English(UK)
Deutsch
Français
Italiano
Español
ENGLISH(US)
ˊஔ
: Chinese
නԨᇕ
: Japanese
Ɋɭɫɫɤɢɣ : Russian