Decorative screws
5
Safety Precautions
Maintaining air fi lters
The cooling structure of the Display is designed to circulate air taken in from outside inside the Display using fans. Air
fi lters are built into the inlet and outlet.
The screen may display “Filter” as you turn on the Display. This means dust is accumulated on air fi lters.
Remove and clean the air fi lters. Consult your dealer about air fi lter replacement when the screen displays “Filter”
within a short period after cleaning.
How to remove air fi lters
Always unplug the power plug before removing air fi lters.
1
2
Release the top and bottom catches of the
fan cover to open the fan cover.
Loosen the top and bottom decorative
screws located on the side of the fan cover
until they turn freely.
Catches
Fan covers
To Next Page
Loading...
