6
Safety Precautions
3
4
Pull out the fi lter frame laterally.
Remove air fi lters from the fi lter frame.
The inlet fi lter (accordion type) and the outlet
fi lter (mesh type) differ in shape.
Filter frame
Fan
Filter frame
Air fi lter
(Inlet fi lter: accordion type)
Air fi lter
(Outlet fi lter: mesh type)
Cleaning air fi lters
Clean foreign matter or dust adhering to air fi lters and the outside of them with a vacuum cleaner. In doing so, be
careful not to tear the air fi lters.
How to install air fi lters
To install air fi lters to the Display, reverse procedure to remove the air fi lters. In doing so, do not confuse the inlet
and outlet fi lters. The confusion may cause failure in the Display due to improper air fi lter function.
Notes:
• Air fi lters must be installed before using the Display. The absence of an air fi lter may cause failure in the
Display due to the intake of foreign matter or dust.
• When an air fi lter is damaged or is unobtrusively soiled even after cleaning, replace the air fi lter with a new
one. Contact your sales agent for replacement.
• The amount of foreign matter or dust adhering to air fi lters varies depending on the installation location and the
used hours. Increase the frequency of cleaning in locations where dust can easily accumulate.
• Do not touch the fans or wiring inside the Display.
• When removing air fi lters from or installing into the Display set on a high place, take care of your own safety,
and avoid the concerned parts falling.
To Next Page
Loading...
