Panasonic TH-49LFV8U

Computer operation
1. Turn on the computer.
2. Consult your system administrator for instructions
on making the Network settings.
When the display settings are the default settings
Network configuration : Static IP
Static IP configuration.
IP address 192.168.0.8
Subnet mask 255.255.255.0
Gateway 192.168.0.1
The computer can be used with the following
network settings.
IP address 192.168.0.9
Subnet mask 255.255.255.0
Gateway 192.168.0.1
PJLink protocol
The Network function of the unit is compatible with
PJLink Class 1. The following operations can be
performed from the computer using the PJLink protocol.
●
Setting the Display
●
Querying the Display status
Notes
●
Set “Eco mode” to “Normal” when using the PJLink
protocol. ( See page 31)
●
Set “Eco mode” to “Normal” when using Early
Warning or Multi Monitoring & Control. ( See page
31)
Supported commands
The commands used to control the unit with PJLink
protocol are as follows.
Command Control
POWR Power control
0: Standby
1: Power On
POWR? Power status query
0: Standby
1: Power On
Command Control
INPT Input switch
11: PC IN input (PC)
21: COMPONENT input
(COMPONENT)
22: VIDEO input (VIDEO)
31: HDMI 1 input (HDMI1)
32: HDMI 2 input (HDMI2)
33: Display Port IN input
(DisplayPort)
34: DVI-D IN input (DVI-D)
41: USB input (USB)
INPT? Input switch query
11: PC IN input (PC)
21: COMPONENT input
(COMPONENT)
22: VIDEO input (VIDEO)
31: HDMI 1 input (HDMI1)
32: HDMI 2 input (HDMI2)
33: Display Port IN input
(DisplayPort)
34: DVI-D IN input (DVI-D)
41: USB input (USB)
AVMT Shutter control
10: Picture On
(picture Off deactivated)
11: Picture Off
(picture off)
20: Audio On
(audio Mute deactivated)
21: Audio Off
(audio muted)
30: Shutter mode Off
(picture Off and audio Mute
deactivated)
31: Shutter mode On
(picture off and audio muted)
English
36