13
3. Point the tip of the optical attachment toward the display screen.
A pointer is displayed on the screen.•
During remote operation, you can draw a character or other object by moving the pointer with the remote draw •
button held down, and erase it by moving the pointer with the remote erase button held down.
The pointer can be changed with the menu of Panasonic WhiteBoard Software.•
Notes
The electronic pen can be used for drawing with its pen tip even when the optical attachment is attached. •
When you use the eraser, detach the optical attachment.
If Display and the remote pointer are not far enough apart from each other, the on-screen pointer will be slightly •
shifted towards the screen edge, and, away from the location to which the remote pointer is actually pointing.
The pointer cannot be changed with Easy WhiteBoard.•
The hole on the optical attachment is used for tagging in order to prevent it from being lost. The electronic pen •
may slip from the optical attachment. Strap the optical attachment and do not swing it with the electronic pen
set in it.
To Next Page
Loading...
