Why does my Panasonic Plasma TV power automatically turn off?
If your Panasonic Plasma TV unexpectedly turns off, check the settings for 'PC POWER MANAGEMENT', 'DVI-D POWER MANAGEMENT', 'NO SIGNAL POWER OFF', and 'NO ACTIVITY POWER OFF' in the SETUP menu.
What to do if my Panasonic Plasma TV remote control is not working?
If your Panasonic Plasma TV remote control isn't working, first check if the batteries are completely discharged or inserted incorrectly. Also, make sure the remote control sensor isn't exposed to outdoor light or strong fluorescent light. Finally, verify that you're using the remote control specifically designed for your unit.
Why does my Panasonic Plasma TV have no picture?
If your Panasonic Plasma TV shows no picture, make sure the TV is plugged into the AC outlet. Then, press the power switch or the stand-by button on the remote control.
Why does my Panasonic Plasma TV have normal picture but no sound?
If your Panasonic Plasma TV shows a normal picture but has no sound, first check whether the mute function has been activated on the remote control. Also, check if the speakers are connected properly.
General| Screen Size | 50 inches |
|---|---|
| Resolution | 1366 x 768 pixels |
| Display Type | Plasma |
| Brightness | 1500 cd/m² |
| Aspect Ratio | 16:9 |
| Viewing Angle | 160 degrees |
| Input Ports | HDMI, VGA, Component, Composite |
Details the AC power supply cord specifications and safety guidelines for connection and use.
Guides on how to connect and secure the AC power cord and other cables.
Explains how to connect various video equipment to the display.
Guides through the initial setup process upon first switching on the unit.
Details the AUTO SETUP function and its automatic adjustment modes for picture position and size.
Enables fine picture adjustment at a professional level, including color and white balance.
Guides on setting the day/time and configuring the on/off timer for the display.
Configuration for NANODRIFT SAVER and applying recommended settings via EXPRESS SETTINGS.
Options for individually setting image retention reduction menus and resetting to factory defaults.
Selects signal type for Component/RGB or PC input terminals.
Selects signal type for DVI input terminals.
Addresses common symptoms related to the plasma display panel, such as darkening or flickering edges.
To Next Page
