Panasonic TH-50PF30U - Remote Control Operation; Remote Transmitter Functions

7.2. No Power
First check point
There are following 3 states of No Power indication by power LED.
1. No lit.
2. Green is lit then turns red blinking a few seconds later.
3. Only red is lit.
TH-50PF30U
No lit.
OK
C h e c k ^ ^ \^
But no AC supplied
board
1
r
NG 1
Check AC power cord
or power source
Check
Fuse F601, F602, F501, F201
OK
Check
A board
Check
DS board
7.3. No Picture
20