Basic Controls
Main Unit
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu
screen will switch. (see page 14)
Normal Viewing Picture
Sound Pos./Size Setup
INPUT button
(INPUT signal selection)
(see page 11)
Volume Adjustment
Volume Up “+” Down “–”
When the menu screen is
displayed:
“+” : press to move the cursor up
“–” :
press to move the cursor down
(see page 14)
Enter / Aspect button
(see page 14)
Remote control sensor
Main Power On / Off Switch
Power Indicator
The Power Indicator will light.
• Power-OFF .... Indicator not illuminated (The unit
will still consume some power
as long as the power cord is still
inserted into the wall outlet.)
• Standby ........ Red
• Power-ON ...... Green
• PC Power management (DPMS)
.........................Orange (With PC input signal.)
• DVI-D Power management
.........................Orange (With DVI input signal.)
• No activity power off
.........................Red
When this function is set to “Enable”, the power is turned off (standby) automatically when there
is no operation of the Plasma Display for 4 hours.
Starting from 3 minutes before the turn off, the remaining time will be displayed.
No activity power off
3min
Press any key to abort.
To Next Page
Loading...
