Panasonic TH-55CQ1 - Remote Control Transmitter

24
English
Remote Control Transmitter
1 POWER ON button ( )
●
Turns the power on (Picture is displayed) when the
display is turned off (Standby condition).
2 STANDBY button (
)
●
Turns the power off (Standby condition) when the
display is turned on.
3 Numeric buttons (0 - 9) / ∙
●
Input numbers in LAN settings.
4 PICTURE
●
Adjust Picture mode. (see page 31)
5 SOUND
●
Changes the Sound mode. (see page 33)
6 VOL + / VOL -
●
Adjusts sound volume level. (see page 27)
7 Navigation keys (
, , ►, )
●
Used in the USB menu and HDMI CEC function.
8 ENTER / Cursor buttons (
)
●
Used to operate the menu screens. (see page 29)
9 EXIT
●
Turns off the menu screens. (see page 29)
10 DISPLAY
●
Displays information of displayed signal.
11 USB
●
Switches to USB device viewing.
12 HDMI
●
Selects to fit the input signal.
13 MUTE
●
Sound mute on / off. (see page 27)
14 INPUT ˄ / ˅
●
Switches input to display on the screen.
(see page 26)
15 ASPECT
●
Change aspect ratio. (see page 28)
16 MENU
●
Press to open the OSD menu. (see page 29)
Note
●
In this manual, buttons of the remote control and the
unit are indicated as < >.
(Example: <INPUT>.)
The operation is mainly explained indicating the
remote control buttons but you can also operate with
the buttons on the unit when there are the same
buttons.