Panasonic TH-55VF2HW - Page 34

English
34
■ When the Unit is turned on for the first time
Following screen will be displayed.
1
Select the language with and
press <ENTER>.
English (UK)
Deutsch
Français
Italiano
Español
ENGLISH (US)
Русский
OSD language
2
For vertical installation, select
[Portrait] with and press
<ENTER>.
Display orientation
Landscape
Portrait
3
Select [Long life mode] with and
set with .
Long life settings
Long life mode
Auto brightness adjustment
Off
Off
Set
4
Select [Auto brightness adjustment]
with and set with .
5
Select [Set] with and press
<ENTER>.
Note
●
Once the items are set, the screens won’t be
displayed when switching on the unit next time.
Each item can be reset in the following menus.
[OSD language] (see page 67)
[Display orientation] (see page 74)
[Long life settings] (see page 76)
■ Power ON message
The following message may be displayed when turning
the unit power ON:
No activity power off Precautions
’No activity power off’ is enabled.
When [No activity power off] in the [Setup] menu is set to
[Enable], a warning message is displayed every time the
power is turned ON. (see page 66)
“Power management” Information
Last turn off due to ’Power management’.
When “Power management” is functioned, an
information message is displayed every time the power
is turned ON. (see page 64)
These message displays can be set with the following
menu:
●
[Options] menu
Power on message(No activity power off)
(see page 78)
Power on message(Power management)
(see page 79)