To Next PageTo Next PageHow to fix no sound on my Panasonic Monitor?
If there is no sound on your Panasonic Monitor, it might be because the mute function has been activated on the remote control. Check the remote to see if the mute function is on and deactivate it.
What to do if there is no picture on my Panasonic TH-58PH10EK Monitor?
If your Panasonic Monitor shows no picture, ensure that the monitor is plugged into an AC outlet and switched on. Try pressing the power switch or the stand-by button on the remote control.
Why is my Panasonic TH-58PH10EK Monitor remote control not working?
If the remote control for your Panasonic Monitor isn't working, the batteries may be discharged or not inserted correctly; check them. Also, make sure the remote control sensor isn't exposed to bright light, like outdoor light or strong fluorescent light. Finally, confirm you're using the correct remote designed for your unit, as other remotes won't work.
How to prevent image retention on Panasonic Monitor?
To prevent image retention on your Panasonic Monitor, avoid displaying still pictures for extended periods. Displaying a still picture for a long time can cause a permanent image retention.
Why does it take a while for the picture to appear on my Panasonic TH-58PH10EK Monitor?
It may take a few moments for the picture to appear on your Panasonic Monitor when the power is turned on, when the input has been switched, or when the images for the main picture and sub picture on the two screens are swapped. This is because the unit digitally processes the various signals.
How to fix cut off picture when using zoom on Panasonic TH-58PH10EK?
If the top or bottom of the picture is cut off when using the zoom function on your Panasonic Monitor, adjust the position of the picture on the screen.
Why are there missing image areas when I use the zoom function on my Panasonic Monitor?
When using video software with a screen wider than the 16:9 mode on your Panasonic Monitor, blank areas separate from the images are formed at the top and bottom of the screen.
Why does the screen darken on my Panasonic TH-58PH10EK when showing bright pictures?
The screen on your Panasonic Monitor may darken slightly when bright pictures with minimal movements are shown to reduce image retention and prevent shortening the screen’s service life. This is normal.
Why does my Panasonic Monitor make whirring sounds?
The whirring sound from your Panasonic Monitor is caused by the cooling fan, which dissipates heat generated during normal use. This is normal.
Why do the edges of the images flicker on my Panasonic TH-58PH10EK?
The flickering edges on your Panasonic Monitor are due to the characteristics of the system used to drive the panel and are normal.
General| Screen Size | 58 inches |
|---|---|
| Resolution | 1920 x 1080 pixels |
| Panel Type | Plasma |
| Viewing Angle | 160 degrees |
| Aspect Ratio | 16:9 |
| Connectivity | HDMI, DVI, VGA, Component, Composite |
| Input Terminals | HDMI, DVI, VGA, Component, Composite |
