10
English
Remote Control Batteries
Open the battery cover.
AA/R6/LR6 type
Insert batteries and close
the battery cover.
(Insert starting from the
side.)
Note
●
Incorrect installation of the batteries can cause
battery leakage and corrosion that will damage the
remote control.
●
Disposal of batteries should be done in an
environment-friendly manner.
Take the following precautions.
1. Batteries shall always be replaced as a pair.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example; manganese
dioxide battery and alkaline battery etc.).
4. Do not attempt to charge, disassemble, or burn used
batteries.
5. Do not burn or breakup batteries.
Moreover, batteries must not be exposed to excessive
heat such as sunshine, fire or the like.
Optional accessory
Please firmly install the pedestal stand sold separately.
Installation should be done by a professional vendor.
Pedestal
•
TY-ST75PE9
Note
●
When installing the pedestal, thoroughly read the
instructions manual included with the product and
correctly install the stand. Make sure to take the fall-
prevention measures.
●
For ensuring safety and performance, ask your
distributor or a professional vendor to carry out the
installation work.
●
Please note that we will not be responsible for any
product damage that happens due to defects in the
installation environment of stand or wall-mounting
clasp even if it is within the warranty period.
●
For the products that you are no longer using, ask
a professional contractor to promptly remove such
products.
●
When installing, “crack in LCD panel” may occur
because of impact etc. Therefore, please carefully
handle the product.
●
The part numbers of optional items are subject to
change without notice.
To Next Page
Loading...
