Panasonic TH-65BFE1W - Speaker; Speaker (M3); Speaker Mounting Clasp

17
English
Mounting sequence of the speaker
Mount the speaker (supplied).
A cross slot screw driver is required for assembling. Therefore, arrange it in advance.
1
As shown in the figure below, mount the speaker on the display.
Fix the speaker with 2 speaker mounting clasps and 4 speaker mounting bolts (supplied).
Note
●
Speaker mounting clasps are assembled with the speaker and supplied with it.
■ In the case of lateral placement
Speaker
Bolts for mounting the speaker
(M3)
*
Fix the opposite side in the symmetric position.
■ In the case of vertical placement
Speaker
Bolts for mounting the speaker (M3)
*
Fix the opposite side in the symmetric position.