Panasonic TH-65EQ1W - Page 120

120
English
*
1: Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
*
2: Signals to represent formats are as follows.
V : Composite Video (AV IN)
R : D-sub RGB (PC IN)
Y : YP
BPR/YCBCR (PC IN)
D : DVI-D (DVI-D IN)
H : HDMI (HDMI 1, HDMI 2)
The analogue input supports onG and onY.
*
4: Based on VESA CVT-RB (Reduced Blanking) standard
*
5:Signalswith○inthePlugandPlay-supportedsignalcolumnaretheoneswritteninEDID(ExtendedDisplay
Identification Data) of this unit.
Forsignalswithout○inthePlugandPlay-supportedsignalcolumn,resolutionsmaynotbeselectedonthePC
side even if this unit supports those signals.
Note
●
An auto detected signal format may be differently displayed from the actual input signal.
●
[ i ] shown after the number of dots of resolution means the interlace signal.
●
When 1080/30PsF signal and 1080/25PsF signal are input, they are processed as 1080/60i signal and 1080/50i
signal, and then displayed.