EasyManua.ls Logo

Panasonic TH-65EQ1W - Date and Time

Panasonic TH-65EQ1W
129 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
64
English
Customized setting for days of the week
1 Set [Day] to [Custom].
2 While [Day] is selected, press <ENTER>.
The [Day] screen appears.
Day
MONDAY
All
TUESDAY
WEDNESDAY
THURSDAY FRIDAY SATURDAY
SUNDAY
Moves the focus.
<VOL +> Selects days. (Put check marks on days
to select.)
<VOL -> Cancels the day selection. (Delete a
check mark if it has been put.)
<ENTER> Saves the current setting, and returns to
the timer setup screen.
<RETURN> Returns to the timer setup screen without
saving the current setting.
3 Change the setting, press <ENTER>, and return to
the timer setup screen.
With [All], all days are selected/cancelled.
Note
●
Use the remote control for the “Customized setting
for days of the week” operation.
●
If the [Day] screen is deleted without pressing
<ENTER>, the setting is not saved.
Date and time
Set date and time. ([- -] shows no programme is set.)
[Date and time] - submenu screen
Date and time
Set
MONDAY
10:00
2018/01/01
Year 2018
Month
Day
Hour
Minute
1
1
10
0
Synchronize display Off
Parent or child setting Child
Synchronize display setting
NTP synchronization Off
Time zone (GMT + 00:00)
NTP status
Clock display Off
Set date and time
Select [Year / Month / Day / Hour / Minute].
Set the selected item.
Date and time
Set
MONDAY
10:00
2018/01/01
Year 2018
Month
Day
Hour
Minute
1
1
10
0
Select [Set] and press <ENTER>.
99:992015/01/01
Date and time
Set
TUESDAY
18:00
2018/02/06
Year 2018
Month
Day
Hour
Minute
2
6
18
0
Note
●
If the present date and time are not set, the time
settings for [Set up timer], [Screensaver], etc. cannot
be made.
●
The present date and time setting is reset in the
following case.
When the main unit is left unattended for 7 days or
longer after the main unit is turned off with the <Main
Power On / Off button>, the power plug is removed,
or power failure has occurred, etc.
●
Date and time cannot be set when [Year / Month /
Day / Hour / Minute] are set to [- -].
●
The upper limit of date and time that can be set is,
Year 2035, Month 12, Day 31, Hour 23 and Minute
59.

Table of Contents

Related product manuals