10
TH-65VX300ER
6 Service Mode
6.1. CAT (Computer Aided Test) mode
How to access the CAT mode.
Method A : Main unit + remote control operation
Press and hold the button on the front panel of the unit and press the RECALL button on the remote control
3 times quickly within 2 second, this will place the unit into the CAT mode.
To exit the CAT mode, access the ID mode and switch off the main power.
Method B : Remote control operation only
1. Set the OFF timer with the [OFF TIMER] button except for 0 minute.
(30 minutes, 60minutes, 90 minutes)
2. Set the volume level of sound to 0.
(Referred to the volume level setting method)
3. Press the RECALL button more than 3 seconds.
How to Exit
Switch off the main power.
Volume level setting method
In order to set a volume level of sound as 0, please set up with the Sound menu.
1. Pushed the MENU button and select [Sound].
2. Select [Volume], and Choose the [0] with the left button.
To Next Page
Loading...
