Panasonic TH-80LF50ER - Sound Adjustment; SDI Sound Output

0
0
0
Sound
Normal
Normalise
Normal
Off
Treble
Sound Mode
Balance
Bass
Surround
1/2
28
Sound Adjustment
1
Press to display the Sound menu.
Press to select the menu to adjust.
Select the desired level by listening to the sound.
Note: 
2
Select to adjust each item.



Helpful Hint ( /
Normalise

Item Details
Sound Mode
Normal: Emits the original sound.
Dynamic:
Clear: 
Bass 
Treble 
Balance 
Surround 
3
Press to exit from adjust mode.
SDI Sound Output
This menu is available only when selecting a slot that the following terminal board is installed:

2/2
Sound Out
Right Channel
Channel 1
Left Channel
Channel 1
Off
Level Meter
Off
SDI Sound Output
Item Details
Left Channel
Channel 1 to Channel 16
Selects left audio channel.
Right Channel
Channel 1 to Channel 16
Selects right audio channel.
Sound Out
On
Off
On: Enables audio output.
Off: Disables audio output.
Level Meter
Off
1-8ch 9-16ch
Sets audio channels to show in the audio level meter.

each on both right and left sides of the display.
Off: Hides the audio level meter.
1-8ch:
9-16ch :