129
English
Using multi input
display function of
the multi display
Displays images input from multiple devices on one
display simultaneously.
Note
●
The display example of multi input shows [4 input
display]. [Picture in picture] and [Picture by picture]
can also be switched.
●
Set [Multi display settings] - [Screen type] to [Multi
input display]. (see page 55)
Displaying 4 screens
■ MENU operation
1
During the1-screen display, set [Multi
input display] for [Multi display
settings] to [On]. (see page 55)
Switching between [Off] and [On] each time will
switch between the 1-screen display and the
4-screen display.
■ Remote control operation
1
During the 1-screen display, press
[MULTI DISPLAY].
Pressing the button each time will switch between
the 1-screen display and the 4-screen display.
1 2
3 4
1
1-screen display
4-screen display
Switching 4 screens to 1 screen
During the 4-screen display, select a screen to be
displayed with 1-screen.
1
Press <INPUT> during the 4-screen
display to display the selection menu.
Selection menu display
1 2
3 4
1. HDMI1 2. HDMI2
3. DVI-D 4. DisplayPort
2
Press the number of the screen for
the 1-screen display on the numeric
button. Then the selected screen is
displayed.
1
Note
●
In the case of [Picture in picture] and [Picture by
picture], screen switching in addition to screen
selection is also possible.
●
Disabled functions
The following main unit's functions are set to
[Disable (Off)] during multi input display of the
multi display.
•
[Position]
•
Aspect mode (ASPECT)
•
“Power management” function
•
[Input search]
•
[Failover/Failback]
•
[HDMI-CEC settings]
•
[Playlist edit] function
To Next Page
Loading...
