Panasonic TH-L32X10A

12 Adjustment Method
12.1. P-board voltage testing point
Instrument Name Connection Remarks
Digital Voltmeter
Procedures
1. Turn on the power switch and check if the voltages at every testing point are involved in the
below specifications.
2. Switch off the power through remote control and place it in the standby mode. Check if the
voltages at very testing point are involved in the below specifications.
12.2. A-board voltage testing point
Instrument Name Connection Remarks
Digital Voltmeter
Procedures
1. Turn on the power switch and check if the voltages at every testing point are involved in
the below specifications.
20
TH-L32X10A