Panasonic TH-L32X10A

4 Input signal that can be displayed
COMPONENT (Y, P
B
/C
B
,P
R
/C
R
), HDMI
* Mark: Applicable input signal
Signal name Component HDMI
525(480)/60i * *
525(480)/60p * *
625(576)/50i * *
625(576)/50p * *
750(720)/60p * *
750(720)/50p * *
1,125(1,080)/60i * *
1,125(1,080)/50i * *
1,125(1,080)/60p *
1,125(1,080)/50p *
1,125(1,080)/24p *
PC (D-sub 15P)
Signal name Horizontal frequency(kHz) Vertical frequency(Hz)
640 × 400 @ 70 Hz 31.47 70.07
640 × 480 @ 60 Hz 31.47 59.94
640 × 480 @ 75 Hz 37.50 75.00
800 × 600 @ 60 Hz 37.88 60.32
800 × 600 @ 75 Hz 46.88 75.00
800 × 600 @ 85 Hz 53.67 85.06
852 × 480 @ 60 Hz 31.44 59.89
1,024 × 768 @ 60 Hz 48.36 60.00
1,024 × 768 @ 70 Hz 56.48 70.07
1,024 × 768 @ 75 Hz 60.02 75.03
1,024 × 768 @ 85 Hz 68.68 85.00
1,280 × 1,024 @ 60 Hz 63.98 60.02
1,280 × 768 @ 60 Hz 47.70 60.00
1,366 × 768 @ 60 Hz 48.39 60.04
Macintosh13” (640 × 480) 35.00 66.67
Macintosh16” (832 × 624) 49.73 74.55
Macintosh21” (1,152 × 870) 68.68 75.06
Note
•
• •
•
Signals other than above may not be displayed properly.
•
• •
•
The above signals are reformatted for optimal viewing on your display.
•
• •
•
Applicable input signal for PC is basically compatible to VESA standard timing.
•
• •
•
PC signal is magnified or compressed for display, so that it may not be possible to show fine detail with sufficient clarity.
7
TH-L32X10A