57
Wireless Switch Utility
<Only for model with wireless LAN and/or Bluetooth>
When you are using both wireless LAN (Î page 52) and Bluetooth (Î page 56), you can turn them on/off together or sepa-
rately using Wireless Switch Utility. When you are using either of wireless LAN or Bluetooth, you can simply replace Wireless
LAN Switch or Bluetooth Switch with Wireless Switch Utility.
Preparation
A Log on to Windows as an administrator.
B Uninstall Wireless LAN Switch and Bluetooth Switch if they have been installed.
z Before uninstalling Wireless LAN Switch, set [Wireless LAN] to [Enable] in the [Advanced] menu of the Setup
Utility (Î page 63).
C Close all applications.
1 Clicks [start] - [Run], input [c:\util\wswitch\Setup.exe] and then click [OK].
Follow the on-screen instructions.
2 When the installation is completed, restart the computer.
The Wireless Switch Utility icon appears on the notification area.
z : Either wireless LAN or Bluetooth is on.
z : Both wireless LAN and Bluetooth are off.
NOTE
z If you uninstall Wireless Switch Utility, set [Wireless LAN] to [Enable] in the [Advanced] menu of the Setup Utility
before uninstallation (Î page 63).
When you use both wireless LAN and Bluetooth
1 Press
Fn
+
F8
.
The Wireless Switch Utility screen appears.
2 Click the on/off setting for wireless LAN and Bluetooth, and click [OK].
z Click [All OFF] to turn off both wireless LAN and Bluetooth together.
Installing Wireless Switch Utility
Turning On/Off Wireless LAN and/or Bluetooth
To Next Page
Loading...
