64
Setup Utility
Underlined items are the factory presets.
Security Menu
Execute-Disable Bit Capability
• [Enable] indicates that this computer supports hardware-based Data Execution Prevention (DEP).
Disable
Enable
Password on boot Disable
Enable
SD Startup
• Only when [Password on boot] is set to [Enable] and one or more SD cards are registered.
Disable
Enable
SD Setting Method
• Only when [SD Startup] is set to [Enable]
Leave Set
Set and Eject
XClear registered SD card
• Only when one or more SD cards are registered.
Enter the sub-menu.
XSet Supervisor Password Enter the sub-menu.
Setup Utility Prompt
• When [Setup Utility Prompt] is set to [Disable], the message “Press F2 for Setup / F12 for LAN” is
not displayed on [Panasonic] boot screen. However,
F2
and
F12
will work even if the message
is not displayed.
Disable
Enable
Boot First Menu Disable
Enable
Hard Disk Lock Disable
Enable
User Password Protection No Protection
Protected
XSet User Password Enter the sub-menu.
MP Floppy Operation
• This setting works only with the floppy disk drive in the multimedia pocket, and not with an
external floppy disk drive.
Disable
Enable
MP CD/DVD Operation Disable
Enable
XEmbedded Security (TPM) Sub-Menu Enter the sub-menu.
To Next Page
Loading...
