Panasonic Toughbook CF-51PF66EBM

65
Setup Utility
*1
Displayed even if the floppy disk drive is not inserted or [MP Floppy Operation] in [Security] menu is set to [Disable].
You can use the drive below as an alternative boot drive to the floppy disk drive in the multimedia pocket.
Panasonic USB floppy disk drive (optional: CF-VFDU03)
*2
The devices under [Excluded from boot order] are not booted.
 To change the boot order
To move up, select the device with Ï and Ð, and then press F6 .
To move down, select the device with Ï
and Ð, and then press F5 .
To move the device from [Excluded from boot order] to [Boot priority order] or vice versa, select the device with Ï
and Ð, and
then press
X .
To return to the default setting, press
1 .
NOTE
z The default order is [MP Floppy] -> [IDE HDD] -> [IDE MP] -> [PCI LAN].
z To boot from the following devices, confirm the settings as below.
Boot Menu
Boot priority order:
1: MP Floppy: xxxxxxxxxx
*1
2: IDE HDD: xxxxxxxxxx
3: IDE MP:
xxxxxxxxxx
4: PCI LAN:
xxxxxxxxxx
5:
6:
7:
8:
Excluded from boot order:
*2
: USB FDD
*1
:
: USB KEY:
: USB HDD:
: USB CDD:
: USB LS120:
To boot from
You need to set
• USB connected device : [USB Port] and [Legacy USB Support] to [Enable] (Î page 63)
• LAN : [LAN] to [Enable] (Î page 63)
• Multimedia pocket device : [MP CD/DVD Operation] to [Enable] (Î page 64)
• Floppy disk drive : [MP Floppy Operation] to [Enable] (Î page 64)