60
Setup Utility
You can make the settings of the computer’s operating environment (password settings, startup drive selection, etc.)
1 Turn on or restart the computer.
2 Press
F2
several times while [Panasonic] boot screen is displayed soon after the com-
puter starts the startup procedure.
When [Enter Password] is displayed, enter your password.
When you start the Setup Utility with Supervisor Password
z You can make the settings of all items of the Setup Utility.
When you start the Setup Utility with User Password
z Note the following:
• In the [Advanced] and [Boot] menus, you cannot make the settings of all items.
• In the [Security] menu, you can change only the User Password when [User Password Protection] is set to
[No Protection]. You cannot delete the User Password.
• In the [Exit] menu, you cannot make the setting of [Get Default Values].
•
F9
does not function.
Starting the Setup Utility
To Next Page
Loading...
