101
Expanding Memory
If the RAM module is recognized correctly, the total size of this computer’s memory and RAM module memory is
displayed on the [Information] menu of the Setup Utility.
If the RAM module is not recognized, turn off the computer and insert it again.
1 Carefully open the left and right hooks (E).
The RAM module will be raised.
2 Carefully remove the RAM module from the slot.
3 Set the cover and battery pack back.
Removing the RAM Module
<CF-C1 Series> <CF-S10 Series>
<CF-C1 Series> <CF-S10 Series>
To Next Page
Loading...
