162
Setup Utility
Underlined items are the factory presets.
Peripheral Configuration
Battery Charging LED Mode
• Only for CF-C1 Series
• You can use the LED indicators on the front of the computer to check the battery charging status
( page 41).
When [Single] is selected, the battery charging status is indicated by the single LED.
When [Multiple] is selected, the battery charging status is indicated by multiple LEDs when the
computer power is off and the display is closed.
Single
Multiple
XOptional Kit Configuration
• Can be changed only when [Set Supervisor Password] is set.
Enters the
sub-menu.
Advanced Menu
XCPU Configuration Enters the
sub-menu.
Execute-Disable Bit Capability
• [Enabled] indicates that this computer supports hardware-based Data Execution
Prevention (DEP).
Disabled
Enabled
Intel(R) Hyper-Threading Technology Disabled
Enabled
Core Multi-Processing Disabled
Enabled
Intel(R) Virtualization Technology Disabled
Enabled
Intel(R) VT-d Disabled
Enabled
Intel(R) Trusted Execution Technology
• Only for model that supports Intel(R) AMT
Disabled
Enabled
Intel(R) Turbo Boost Technology 2.0 Disabled
Enabled
HDD Controller Setting Compatible
AHCI
Optical Drive
• Only for CF-S10 Series
Disabled
Enabled
To Next Page
Loading...
