155
Hard Disk Drive
<CF-C1 Series>
To change your hard disk drive, contact your technical support office.
CAUTION
Back up all the important data before removing the hard disk drive.
If you need to read the hard disk data on another computer for repair or any other purpose, set [Hard Disk Lock] to
[Disabled] in the [Security] menu of the Setup Utility ( page 166) before removing the hard disk drive.
Carefully remove/insert the hard disk drive since the hard disk drive is extremely sensitive to shock. Note that static
electricity may affect some internal components.
1 Turn off the computer and disconnect the AC adaptor.
Do not use sleep/ standby or hibernation.
2 Remove the battery pack ( page 47).
3 Insert/Remove the hard disk drive.
To remove
A Slide the latch (A) to the arrow direction, and slide the hard disk drive out of the slot.
Inserting/Removing the Hard Disk Drive
Windows 7
Windows XP
To Next Page
Loading...
