203
Hard Disk Backup/Restore Function
C Write down all of the contents of the Setup Utility and press
F9
.
• At the confirmation message, select [Yes] and press
Enter
.
D <CF-S10 Series>
Select the [Main] menu, then select [Optical Drive Power] and press
Enter
.
E <CF-S10 Series>
Select [On] and press
Enter
.
F Press
F10
.
• At the confirmation message, select [Yes] and press
Enter
.
• The computer will restart.
G Press
F2
or
Del
while [Panasonic] boot screen is displayed.
• The Setup Utility starts up.
• If the [Panasonic] boot screen is not displayed, turn on the computer while holding down
F2
or
Del
.
• If the password is requested, enter the Supervisor Password.
H Set the recovery disc into the CD/DVD drive.
I <CF-C1 Series>
Select the [Exit] menu, then select your CD/DVD drive in [Boot Override].
<CF-S10 Series>
Select the [Exit] menu, then select [MATSHITAXXXX] in [Boot Override].
J Press
Enter
.
• The computer will restart.
K Click [Run “System Recovery Options”] and click [Next].
L Click [Next].
• Do not specify keyboard layouts other than the one already selected.
M Follow the on-screen instructions.