209
Intel
®
Active Management Technology
F Reenter the password in [Verify password] and press
Enter
.
G Select [Intel(R) AMT Configuration] and press
Enter
.
H Select [Activate Network Access] and press
Enter
.
I Press
Y
on the [Caution] screen.
J Select [Previous Menu] and press
Enter
.
K Select [Exit] and press
Enter
.
L Press
Y
in the [CONFIRM EXIT] screen.
Automatic restart will repeat, and Windows will start up.
NOTE
You can use the following characters to set Intel(R) ME Password.
• Minimum of 8 and maximum of 32 characters are used.
• 1 or more numeric characters are included.
• 1 or more special characters (example: “!” “$”) are included (only characters that can be displayed with the US
keyboard).
• Capital letters and small letters are mixed.
When you are entering your password, the software recognizes the keyboard as a US keyboard. As a result,
depending on the keyboard you are using, different characters (unintended characters) may be entered for certain
keys.
The following table shows some examples.
To Next Page
Loading...
