24
Key Combinations
Fn
+
F3
Display mode switching ( page 103)
When an external display is connected you can change the operating mode.
A Press
Fn
+
F3
.
B Click the display mode. (Computer only/Duplicate/Extend/Projector
only)
The change you made may not be effective until
Enter
is pressed.
You can also change the display mode by pressing +
P
.
(When an external display is connected)
Internal LCD Simultaneous display External display
NOTE
<CF-C1 Series with Port Replicator Connector>
When an external display is connected to an optional port replicator ( page
102), the display switching may work differently from the above. For further
information, refer to the Operating Instructions of the port replicator.
CAUTION
Do not press any keys until the display has finished switching.
Do not use this function:
• When an external display is not connected.
• When playing motion video such as DVD or MPEG.
• When using the Extended Desktop.
Key Functions Pop-up Icon
Windows 7
Windows XP
To Next Page
Loading...
