EasyManua.ls Logo

Panasonic TX-21AP1P Service Manual

Panasonic TX-21AP1P
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Colour Television
TX-21AP1P
Z8T Chassis
SPECIFICATIONS
Power Source: 220-240V a.c., 50Hz
Power Consumption: 52W
Stand-by Power
Consumption: 0,9W
Aerial Impedance: 75 unbalanced, Coaxial Type
Receiving System: PAL B/G, PAL D/K ,PAL-60
SECAM B/G, SECAM D/K
M.NTSC (AV)
NTSC (AV only)
Receiving Channels:
VHF E2-E12 VHF H1-H2 (ITALY)
VHF A-H (ITALY) VHF R1-R2
VHF R3-R5 VHF R6-R12
UHF E21-E69 CATV (S01-S05)
CATV S1-S10 (M1-M10) CATV S11-S20 (U1-U10)
CATV S21-S41 (HYPERBAND)
Intermediate Frequency:
Video/Audio
Video 38,9MHz
Audio 32,4MHz, 32,66MHz (A2 CZECH)
33,05MHz (NICAM)
33,4MHz, 33,16MHz (A2)
33,05MHz (NICAM B/G)
Colour 34,47MHz
34,5MHz, 34,65MHz
Terminals:
AV1 IN Video (21 pin) 1V p-p 75
Audio (21 pin) 500mV rms 10k
RGB (21 pin) 0,7V p-p 75
AV1 OUT Video (21 pin) 1V p-p 75
Audio (21 pin) 500mV rms 1k
AV FRONT Audio (RCAx2) 500mV rms 10k
Video (RCAx1) 1V p-p 75
High Voltage: 27kV ± 1kV
Picture Tube: A51ERF135X71 51cm
Audio Output: 2 x 5W RMS, 2 x 10W MPO
8 Impedance
Headphones: 8 Impedance
Accessories
supplied : Remote Control
2 x R6 (UM3) Batteries
Dimensions:
Height: 476mm
Width: 524mm
Depth: 473mm
Net weight: 22kg
Specifications are subject to change without notice.
Weights and dimensions shown are approximate.
NOTE: This Service Manual should be used in conjunction with
the Z8 Technical guide.
ORDER No. 02-SM-007

Other manuals for Panasonic TX-21AP1P

Question and Answer IconNeed help?

Do you have a question about the Panasonic TX-21AP1P and is the answer not in the manual?

Panasonic TX-21AP1P Specifications

General IconGeneral
BrandPanasonic
ModelTX-21AP1P
CategoryTV
LanguageEnglish

Summary

Service Manual

Colour Television TX-21AP1P Z8T Chassis

Identifies the specific colour television model and chassis type.

SPECIFICATIONS

Lists the technical specifications for the television, including power, impedance, and receiving systems.

ADJUSTMENT PROCEDURE

+B SET-UP

Procedure for setting the +B voltage, confirming specific voltages.

CUT OFF / Ug2 Test

Test procedure to set contrast, brightness, and adjust screen voltage for optimal performance.

SELF CHECK

Routine to automatically check bus lines and hexadecimal codes of the TV set.

Service Aids

LUCI interface kit

Interface and cables for connecting TV service connector to a PC with diagnostic software.

VICI (Visual Interactive Computer Information)

CD-ROMs containing multimedia documentation for quick access to service information.

TASMIN (Technically Advanced System for Multimedia Interactive Notes)

System for interactive training and quick access to technical information.

WAVEFORM PATTERN TABLE

ALIGNMENT SETTINGS

Alignment Function Table

Detailed table of alignment functions, setting indications, and special features for TV calibration.

Option Bytes Input

Instructions for inputting option bytes using remote control codes for model configuration.

VIDEO & STEREO AUDIO BLOCK DIAGRAM

POWER SUPPLY & DEFLECTION BLOCK DIAGRAM

CONTROL BLOCK DIAGRAM

Y-BOARD SCHEMATIC

E-BOARD SCHEMATIC

Related product manuals