Panasonic TX-29F350T User Manual

Power Source : AC SINGLE 220-240V, 50/60Hz
Power Consumption : 110W
Aerial Impedance : 75Ω unbalanced
Coaxial type
Receiving System :
17 Systems
Receiving Channels :
VHF
2-12 PAL/SECAM B, K1
0-12 PAL B (AUST.)
1-9 PAL B (N.Z.)
1-12 PAL/SECAM D
1-12 NTSC M (JAPAN)
2-13 NTSC M (U.S.A)
UHF
21 - 69 PAL G, H, I/SECAM G, K, K1
28 - 69 PAL B (AUST.)
13 - 57 PAL D, K
13 - 62 NTSC M (JAPAN)
14 - 69 NTSC M (U.S.A.)
CATV
S1 - S20 (OSCAR)
1 - 125 (U.S.A. CATV)
C13 - C49 (JAPAN)
S21 - C41 (HYPER)
Z1 - Z37 (CHINA)
5A, 9A (AUST.)
Intermediate Frequency :
© 2006 Matsushita Electric Industrial Co., Ltd. All
rights reserved. Unauthorized copying and
distribution is a violation of law.
TX-29F350T
GP21 Chassis
Video 38.0 MHz
Sound 31.5 MHz (D, K, K1)
32 MHz (I)
32.5 MHz (B, G)
33.5 MHz (M)
Colour 33.57 MHz (PAL)
33.6 MHz (SECAM)
33.75 MHz (SECAM)
34.42 MHz (NTSC)
Video / Terminals :
AV 1, 2 Y:1 Vp-p, 75Ω
S-Video In C:0.3 Vp-p, 75Ω
DVD
Y 1.0 Vp-p, 75Ω
PB 0.7 Vp-p, 75Ω
YR 0.7 Vp-p, 75Ω
AV 1, 2, 3, 4
Video In 1 Vp-p, 75Ω
Audio In Approx. 0.5V, 47kΩ
Monitor Out Video Out 1 Vp-p, 75Ω
Audio Out Approx. 0.5V, 1kΩ
High Voltage : 30.5±1.0V
at zero beam current
Picture Tube : A68LZU185X-E
67.6cm (29 inches)
Measured diagonally,
Colour Television
Specifications
ORDER NO. MTV0601446CE

Panasonic TX-29F350T Specifications

General

Screen Size	29 inches
Display Technology	CRT
Aspect Ratio	4:3
TV Standard	PAL/SECAM
Input Ports	Composite, S-Video, Component

Summary

Television Specifications

Power, System, and Signal Parameters

Details on power, receiving systems, channels, video, sound, and CATV signals.

High Voltage and Picture Tube Characteristics

High voltage output and picture tube specifications.

Safety Precautions

General Guide Lines

General advice for safe servicing procedures.

Leakage Current Checks

Procedures for cold and hot leakage current checks.

X-Radiation Precautions

Precautions regarding X-ray emissions and measurement.

GP21 Chassis Block Diagram

Service Hints and Adjustments

Service Position and Factory Mode

Procedures for TV positioning and factory mode adjustment.

White Balance and CRT Cut Off

Procedures for adjusting white balance and CRT cut off.

Voltage and Signal Adjustments

Procedures for adjusting B voltage, high voltage, and PAL colour.

CRT Purity and Convergence

Colour Purity Adjustment

Procedure for adjusting colour purity.

Convergence Adjustment

Procedure for adjusting screen convergence.

CRT VRS Adjustment

Procedure for adjusting CRT VRS settings.

Conductor Views

D Board Conductor View

Visual layout of the D board components and connections.

Schematic Diagram

Schematic Diagram Notes and Symbols

Explanations of symbols and notes for schematic diagrams.

Schematic Diagram Remarks and Precautions

Important remarks and safety precautions for schematics.

Board Schematics

D Board Schematics

Detailed schematic diagrams for the D board.

A Board Schematics

Detailed schematic diagrams for the A board.

L Board Schematics

Detailed schematic diagrams for the L board.

G Board Schematics

Detailed schematic diagrams for the G board.

Parts Information

Parts Location Diagram

Illustration showing the physical location of major parts.

Replacement Parts List - Abbreviations

Abbreviations for resistor and capacitor part names and descriptions.

Replacement Parts List - Capacitors

List of replacement capacitors with part numbers and values.

Replacement Parts List - Diodes and Resistors

List of replacement diodes and resistors with part numbers.

Replacement Parts List - Transistors and Coils

List of replacement transistors and coils with part numbers.

Replacement Parts List - Connectors, ICs, and Others

List of replacement connectors, ICs, and other components.