English
26
3 Select the USB HDD for recording and
start setup
USB Drive A
USB Flash Disk
USB Device Setup
Product Name
select
start setup
●
Follow the on-screen instructions.
Recording
1 Display the menu and select [Setup]
Setup
select
access
2 Select [Recording Setup]
select
access
[One Touch Recording]
Records the current programme to the USB HDD
immediately.
●
Confirm the remote control code is “73” (p. 22).
Select the maximum recording time
One Touch Recording 180 minutes
Recording Setup
select
access / store
■ To start One Touch Recording
[REW LIVE TV]
Records the current programme to the USB HDD
constantly within the maximum recordable time.
●
Confirm the remote control code is “73” (p. 22).
Select [Auto] to start [REW LIVE TV]
REW LIVE TV Auto
Recording Setup
select
access / start [REW LIVE TV]
●
When you select [Auto], recording will start
automatically.
●
This recording may not start if another recording is in
progress, TV signal condition is bad or there are no
images displayed.
■ To operate [REW LIVE TV]
●
To pause
●
To search backward (up to 90 minutes)
●
After pausing or searching backward, the following
buttons are available for operation.
Search backward
Playback / Pause
/
Search forward
Return to the current programme
■ To stop [REW LIVE TV]
REW LIVE TV
Recording Setup
Auto
Off
select [Off]
store
●
If you stop [REW LIVE TV], the recorded content for
[REW LIVE TV] will be deleted.
●
[REW LIVE TV] is stopped and the recorded content
is deleted automatically in the following conditions:
(Even if [REW LIVE TV] stops for the following
conditions, as long as the setting is [Auto], a new
recording starts automatically in a condition that
makes the recording available.)
•
Other channels selected
•
Locked channel selected
•
Invalid channel selected
•
No TV signal
•
External input selected
•
When the full-screen application (TV Guide, Media
Player, eHELP, etc.) is launched
•
When the TV enters Standby or is turned off
•
When another recording starts
To Next Page
Loading...
